Cross Section

  • 3d cross section

    Create a fence diagram along a user defined (x, y) path.

  • section profile

    Create a straightened section profile along a user defined (x, y) path, where X becomes the distance along the path.

  • section profile samples

    Display your input data straightened along the line passed into the Subsetting Feature port, where X becomes the distance along the line.

  • section profile axes

    Place 2D axes (distance and elevation) in a section profile viewer.

  • texture cross section

    Project images from a fence onto a cross section surface.

  • section profile viewer

    A restricted viewer for section profiles, permanently oriented to view the XZ plane.

Subsections of Cross Section

3d cross section

The 3d cross section module creates a fence diagram along a user defined (x, y) path in true 3D model space. The fence cross section has no thickness, because it is composed of areal elements such as triangles and quadrilaterals.

It receives a 3D field (with volumetric elements) into its Input Field port, and lines or polylines (from draw lines, polyline processing, import cad, isolines, import vector gis, or other sources) into its Transect port. Its function is similar to buffer distance, however it actually creates a new grid and does not rely on any other modules (e.g. plume or plume shell) to do the “cutting”. Only the x and y coordinates of the input (poly)lines are used, because the module cuts a projected slice that is z invariant. The module recalculates when either input field is changed (and Allow Run is on) or when the Execute button is pressed.

To create a straightened fence, where X becomes the distance along the path, use section profile instead.

Ports

DirectionNameTypeDescription
InputInput FieldFieldThe main field for input.
InputTransectFieldA transect line determining the path for the cross section.
OutputOutput FieldFieldThe fence field.
OutputOutput ObjectRenderableA renderable object displaying the subset fence.

Properties

PropertyTypeDescription
Allow RunBooleanWhen on, the module will run every time a setting is changed.
ExecuteButtonThis button will force the module to run even if the Allow Run toggle has been turned off. This allows the user to make a number of changes before updating.
Clean Fence BoundariesBooleanAttempts to merge all cells between each fence segment (created by each line segment of your 2D input). Occasionally the output will look better with it off, but usually it is better left on.
Nodal Data ComponentsMulti-selectSelects which nodal data to include in the fence. The options are the nodal data components of the input field.
Cell Data ComponentsMulti-selectSelects which cell data to include in the fence. The options are the cell data components of the input field.

section profile

The section profile module creates a straightened section profile along a user defined (x, y) path, where X becomes the distance along the path. Y is flattened to 0 and Z (elevation) is preserved, producing a profile in the XZ plane. It is the straightened counterpart of 3d cross section, and has the same inputs and settings.

It receives a 3D field (with volumetric elements) into its Input Field port, and lines or polylines (from draw lines, polyline processing, import cad, isolines, import vector gis, or other sources) into its Transect port. Only the x and y coordinates of the input (poly)lines are used.

The output is intended for display in a section profile viewer, together with section profile samples for the input data and section profile axes for distance and elevation axes.

NOTE: The beginning of the straightened profile is defined by the order of the points in the incoming line/polyline. This gives the user complete control over how the profile is created. If you are provided a CAD file and you do not know the order of the line points, you can export the lines using write lines, which provides a simple text file that makes it easy to see the order of the points.

Ports

DirectionNameTypeDescription
InputInput FieldFieldThe main field for input.
InputTransectFieldA transect line determining the path for the cross section.
OutputOutput FieldFieldThe fence field.
OutputOutput ObjectRenderableA renderable object displaying the subset fence.

Properties

PropertyTypeDescription
Allow RunBooleanWhen on, the module will run every time a setting is changed.
ExecuteButtonThis button will force the module to run even if the Allow Run toggle has been turned off. This allows the user to make a number of changes before updating.
Clean Fence BoundariesBooleanAttempts to merge all cells between each fence segment (created by each line segment of your 2D input). Occasionally the output will look better with it off, but usually it is better left on.
Nodal Data ComponentsMulti-selectSelects which nodal data to include in the profile. The options are the nodal data components of the input field.
Cell Data ComponentsMulti-selectSelects which cell data to include in the profile. The options are the cell data components of the input field.

section profile samples

The section profile samples module displays your input data straightened along a transect line, for use with straightened section profiles. Each sample’s X coordinate becomes the distance along the transect line passed into the Transect port, Y is flattened to 0, and Z (elevation) is preserved, producing a profile in the XZ plane. Borings farther than the Distance To Profile from the line are dropped from the output.

It reads the same file types as post samples:

  • Sampling locations and the values of the properties in .apdv files
  • The lithology specified in .pgf, .lsdv, .lpdv, or .geo files
  • The location and values of well screens in .aidv files

Samples can be displayed as spheres or other glyphs, along with boring tubes, color tubes, well screens, and well and sample labels. The transect line is required: the module cannot straighten the data without it. Use the same line that is passed to section profile, and display the result in a section profile viewer with section profile axes.

The display can also be exported as an ArcGIS Pro layer package. Because the section profile is its own coordinate space, no real-world coordinate system is applied to the export.

Ports

DirectionNameTypeDescription
InputTransectFieldA transect line determining the path for the section profile.
InputInput FilenameStringFile used to display data.
InputInput Geologic FieldFieldThe geologic field to use for exploding output.
InputInput DateDateDate used for interpolating between dates in a time domain file format.
InputInput Refine DistanceNumberThe value used for refining PGF files.
InputSample GlyphFieldA field containing a glyph that can be placed at sample locations.
OutputOutput FilenameStringFile used to display data.
OutputOutput Refine DistanceNumberThe value used for refining PGF files.
OutputAnalyte NameStringText containing the name of the current analyte.
OutputBoring TubesFieldA field containing the boring tubes. This can be exported as a shapefile or EFB (with EnterVol) for use in ArcGIS.
OutputColor TubesFieldA field containing the color tube lines. This can be exported as a shapefile or EFB (with EnterVol) for use in ArcGIS.
OutputBoring DataFieldA field containing the data associated with each boring. The contents depend on which objects are visible: colored tubes if present, otherwise colored spheres if present, otherwise well screens (interval data).
OutputOutput DateDateDate used for interpolating between dates in a time domain file format.
OutputSample DataRenderableA renderable object displaying the sample data.

Properties

PropertyTypeDescription
Distance To ProfileDoubleThe maximum distance from the transect line passed into the Transect port; borings farther than this distance from the line are dropped from the output.
Allow RunBooleanThis toggle can prevent the module from running, allowing the user to make changes to large data sets without waiting for updates.
ExecuteButtonThis button will force the module to run even if the Allow Run toggle has been turned off. This allows the user to make a number of changes before updating.
FilenameFileThe file name to process for display. Supports .apdv, .aidv, .pgf, .geo, .gmf, .lpdv, .lsdv, .dg, and .ldg files.
Data ComponentIntegerSelects which file data component to process for display.
SamplesBooleanPrevents or allows samples from being created or displayed.
ScreensBooleanPrevents or allows screens from being created or displayed.
Boring TubesBooleanPrevents or allows boring tubes from being created or displayed.
Color TubesBooleanPrevents or allows color tubes from being created or displayed.
Well LabelsBooleanPrevents or allows well labels from being created or displayed.
Sample LabelsBooleanPrevents or allows sample labels from being created or displayed.
Suppress OutputBooleanPrevents updates and warnings from being output. This is useful if running the module in a loop.

Sample Settings

PropertyTypeDescription
Data ProcessingChoice: Linear Processing, Log ProcessingRuns the module in either linear or log space.
Linear Post ClipRange (Min/Max)When Linear Processing is selected, the Minimum and Maximum are used after data processing to replace any sample property value that is less than the minimum or greater than the maximum in linear space.
Log Post ClipRange (Min/Max)When Log Processing is selected, the Minimum and Maximum are used after data processing to replace any sample property value that is less than the minimum or greater than the maximum in log space.
DatamapRange (Min/Max)The min and max values used by the datamap. This does not change data values from the file.
Detection LimitDoubleAffects any file values set with the ‘ND’ or other non-detect flags (see the APDV file format help for a list of these flags). When collapsing to 2D, the module inserts a value equal to (Detection Limit * LT Multiplier), matching 2d estimation’s ND convention; in 3D mode the Detection Limit value itself is inserted.
Less Than MultiplierDoubleThe multiplier applied to any sample with the ‘<’ less than flag.
Default Coordinate UnitsStringThe default coordinate units for the input data.
Sphere Count LimitIntegerThe maximum number of spheres to create. If the number of samples exceeds this value, the module will turn spheres off and generate (more efficient) colored tubes instead.
Maximum Sample ThresholdIntegerThe maximum number of samples from the input file to allow. If the file contains more than this amount an error will occur.
Synthetic OnlyBooleanUsed when reading drill guide files. Causes only the synthetic drill guide samples to be displayed instead of both the synthetic and original samples.

Glyph Settings

PropertyTypeDescription
Glyph SizeDoubleScales the glyphs in all directions. The default is automatically computed based on your input data.
PriorityChoice: Maximum, MinimumMinimum reverses the scaling so that the smallest sample values have the largest size.
Minimum Scale FactorDoubleScales the sample values with the least Priority.
Maximum Scale FactorDoubleScales the sample values with the greatest Priority.
Use Log DataBooleanBases the size of the glyph on the log10 of the selected data.
Generated GlyphChoice: Sphere, Cube, Cone, Cylinder, Polygon, DiskThe type of glyph that is automatically generated when no Sample Glyph is connected.
Sphere SubdivisionsIntegerHow finely the sample spheres are rendered. Higher values mean smoother spheres but at a higher memory cost.
Glyph ResolutionIntegerThe resolution for generated cone, polygon, cylinder, and disk glyphs.
Primary Axis FactorDoubleThe scale factor for the primary axis of the glyph.
Secondary Axis FactorDoubleThe scale factor for the secondary axis of the glyph.
Heading DipHeading/DipAligns the glyphs to a constant orientation.
RollDoubleThe roll of the glyph along its primary axis.

Subsetting Settings

PropertyTypeDescription
Drop Samples BelowDoubleRemoves any sample below the set value.
Drop Samples AboveDoubleRemoves any sample above the set value.
Subset By ExpressionBooleanEnables subsetting the samples using the Control Expression.
Control ExpressionExpressionThe expression used to subset the samples when Subset By Expression is on. Supports the variables {CoordinateX}, {CoordinateY}, {CoordinateZ}, {BoringName}, and {Value}.

Geology Settings

PropertyTypeDescription
Min ThicknessDoubleThe smallest thickness, in user coordinate units, that a geological layer can have.
ExplodeDoubleThe explode distance, which can be set here or referenced by connection. For .geo files, the samples will be exploded based upon their layer designations unless a different geology is imported into the module.
Reverse HierarchyBooleanReverses the hierarchy of the geology. Normal hierarchy will push down any layer that tries to rise through the one above it. Reverse hierarchy will pull up any layer that dips into the one below it.
Screen Refine DistanceDoubleShows how lithology screens can be sampled in indicator modules. At minimum (refine distance of zero) there is a sample at the top and bottom of each layer; the refine distance adds samples between the top and bottom until no sample is more than the refine distance apart.
Max Points Per IntervalIntegerCaps the number of points created between samples in PGF data.
Color Data ComponentChoice: Layer, Material, ElevationThe data used to color the sample spheres: the geologic layer, the material value of that layer, or the elevation of the spheres.

Time Settings

PropertyTypeDescription
File Is Time DomainBooleanTurns on date interpolation for time domain analyte (e.g. chemistry) files.
Specify Date By ComponentBooleanIgnores the Date and selects the date using the Data Component.
DateDateThe date being interpolated to. For example, if you have an analyte value of 2 on 1/01/05 and a value of 4 on 1/03/05 and the date is set to 1/02/05 with Direct Interpolation Only, the value will be 3. The Date can be set here or passed in via the Input Date port.
Analyte NameStringThe analyte name for AIDV and APDV time files, since the dates take up the positions in these files usually reserved for analyte names.
Default Analyte UnitsStringThe default units for the analyte data.
Interpolation MethodChoice: Direct Interpolation Only, Interpolate Only, Interpolate and Extrapolate Beyond, Interpolate and ExtrapolateDefines how to interpolate when given Missing values in a file. See Interpolation Methods below for full details.
Use Nearest MeasuredBooleanGives the sample at the interpolated date the value of the nearest measured date instead of an interpolated value.

Interpolation Methods

Each interpolation method defines how to interpolate when given Missing values in a file. Non-Detect values are equal to either the Detection Limit or the Pre Clip Min. If the Date is set to the same time as a Non-Detect in the file, the sample will be a Non-Detect and not an interpolated value.

  1. Direct Interpolation Only: The most basic interpolation method, and the most accurate in terms of representing the data as it has been entered. Looks at the two dates surrounding the input Date. If either date, or both dates, have Missing as values, the value for that sample will be Missing and no interpolation will occur.
  2. Interpolate Only: Looks through the date columns both before and after the set Date for values that are not Missing, then interpolates between those numbers. If it fails to find a non-Missing value before and after the set date, it sets the data to Missing. Useful for files with a small amount of Missing values.
  3. Interpolate and Extrapolate Beyond: Looks through the date columns both before and after the set Date for the first instance of a value that is not Missing. If it does not find a valid non-Missing date after the input Date, it extrapolates beyond the last useable date to the input Date.
  4. Interpolate and Extrapolate: Looks through the date columns both before and after the set Date for the first instance of a value that is not Missing. If it fails to find one, it extrapolates the first value backwards to the input Date. If the date after the input Date is Missing, it looks forward through the time columns until it finds a date that is not Missing. It also extrapolates beyond the last valid date in the file.

Screen Settings

PropertyTypeDescription
Display Screens AsChoice: Tubes, WiresControls how the well screens are displayed. Tubes displays each well screen as a tube from the top of the screen to the bottom. Wires displays each well screen as a line from the top of the screen to the bottom.
Screen RatioDoubleThe percentage of the Glyph Size used for the screen tube size. For example, with a Glyph Size of 10 and a Screen Ratio of 70%, the size of each tube will be 7.
Screen Tube ResolutionIntegerThe number of divisions used to make each well screen tube. The higher the resolution the smoother or more circular each tube will be.
Close Screen TubesBooleanPlaces a disc, of the same resolution as the tube, inside the top and bottom of each screen tube, giving the well screen tubes a more solid appearance.
Connect Screen LinesBooleanUsed for non-vertical intervals. Separate cells are created between successive screens, and their ends may not be coincident, especially where the angle changes sharply. When on, the separate ends are averaged to merge these cells into a single, slightly distorted but more efficient and seamless tube.

Boring Tube Settings

PropertyTypeDescription
Display AsChoice: Tubes, WiresDisplays the boring as a tube or as a wire.
Tube RatioDoubleThe percentage of the sample sphere minimum size used for the tube size. For example, with sample spheres with a minimum size of 10 and a Tube Ratio of 70%, the size of each tube will be 7.
Tube ResolutionIntegerHow many faces are used to create each tube. Increasing this number results in rounder tubes, but uses more memory. The minimum value is 2, which creates plane like tubes; 3 creates triangular tubes, 4 square, etc.
Tube TopDoubleThe top elevation for each tube. If this value has been specified in the file, the file value is used instead.
Main ColorColorEach boring tube is divided using two colors; the Main Color sets the first of these.
Secondary ColorColorEach boring tube is divided using two colors; the Secondary Color sets the second of these.
Color SeparationDoubleThe length each of the Main Color and the Secondary Color extends before switching to the other. This can be used as a visual clue to the vertical scale of the model.
PhaseDoubleControls the apparent rotation of tubes, in degrees.
Close TubesBooleanCaps the top and bottom of each tube at the same resolution as the tube, giving each tube a solid look.
Connect LinesBooleanUsed for non-vertical borings. Separate cells are created between successive samples, and their ends may not be coincident, especially where the angle changes sharply. When on, the separate ends are averaged to merge these cells into a single, slightly distorted but more efficient and seamless tube.

Color Tube Settings

PropertyTypeDescription
Display AsChoice: Tubes, WiresDisplays the color tube as a tube or as a wire.
Tube RatioDoubleThe percentage of the sample sphere minimum size used for the tube size. For example, with sample spheres with a minimum size of 10 and a Tube Ratio of 70%, the size of each tube will be 7.
Tube ResolutionIntegerHow many faces are used to create each tube. Increasing this number results in rounder tubes, but uses more memory. The minimum value is 2, which creates plane like tubes; 3 creates triangular tubes, 4 square, etc.
Max VariationDoubleCorrects color blending between samples.
PhaseDoubleControls the apparent rotation of tubes, in degrees.
Close Color TubesBooleanCaps the top and bottom of each tube at the same resolution as the tube, giving each tube a solid look.
Connect Color Tube LinesBooleanUsed for non-vertical borings. Separate cells are created between successive samples, and their ends may not be coincident, especially where the angle changes sharply. When on, the separate ends are averaged to merge these cells into a single, slightly distorted but more efficient and seamless tube.

Label Settings

PropertyTypeDescription
Label SubsettingChoice: None, Blank Labels, Boring Min/MaxRestricts the number of labels in a rectangular region by using label blanking, or restricts the number of labels along a boring based on the analytical value.
Blank FactorDoubleA scale used when determining the bounds of a label for overlap avoidance. The scale is based on the height of the label. Available when Label Subsetting is Blank Labels.
Favor Min ValueBooleanUsed for label subsetting. When overlaps occur, or Boring Min/Max is selected, keeps the lowest value.
TitleExpressionThe template the title (well) labels are generated with. Supports the variables {Well}, {X}, {Y}, and {Z}.
Title PositionChoice: Top of Boring, Bottom of Boring, Top and BottomPlaces the title label at the top of the boring, below the last sample of the boring, or both.
Title Label SettingsLabel SettingsAligns and sizes the well/title labels independently from the sample and screen labels.
FeaturesExpressionThe template the feature (sample) labels are generated with. Supports the variables {X}, {Y}, {Z}, {Depth}, {Distance}, {Flag}, {Value}, and {Material}.
Default TopChoice: First Sample, Tube TopIf the ground elevation is not defined in the file, sets the top to either the first sample in a boring or the Tube Top value. This affects how labels that use the top value are displayed.
Well Label Radial OffsetChoice: None, OffsetControls whether the Radial Offset is applied to well labels. By default, well labels are placed directly above/below the boring. Offset applies the same Radial Offset used for sample labels.
Screen LabelingChoice: At sample, At mid-intervalSpecifies where each feature label occurs for screens.
Label TypeChoice: TrueType Fonts, Line FontsSelects between two font types. TrueType fonts are standard fonts. Line fonts are low impact fonts which perform better when large numbers of labels are generated.
TrueType Font StyleFontAlters the basic look of the font. Available when Label Type is TrueType Fonts.
Sample Label SettingsLabel SettingsControls the alignment, angle, and height of sample and screen labels.
Label ColorColorThe color for every label.
Top OffsetDoubleA vertical offset from the top of the boring, for well labels only.
Radial OffsetDoubleThe sample label offset from the sample’s center, in sphere diameter units, for sample labels only. A value of 1.0 is one sample diameter.
Z OffsetDoubleA vertical offset from the sample’s Z coordinate, for sample labels only.

Esri Export

PropertyTypeDescription
Package FileFileThe ArcGIS Pro layer package (*.lpkx) output; setting the filename writes the package. The package bundles the sample points, well screens, color tubes, borings, and labels as feature classes in a file geodatabase, together with a layer file styled to match the display, into one portable file.
Translate By OriginBooleanWrites the output in the user’s coordinate space. When turned off, the output is written around the origin.
Z ScaleDoubleThe vertical exaggeration applied as each exported layer’s display-side Vertical Exaggeration in ArcGIS; the coordinates themselves stay at true elevation. For a profile exported in XY, the exaggeration is instead baked into the profile’s vertical axis, since 2D maps have no elevation settings.
Features To ExportMulti-select: Samples, Well Screens, Boring Tubes, Color Tubes, Well Labels, Sample LabelsSelects which feature classes are included in the package. Each output must also be enabled by the matching toggle (Samples, Screens, Boring Tubes, Color Tubes, Well Labels, Sample Labels).
Target Number Of BreaksIntegerThe target number of legend class breaks for continuously colored layers. Exact for linear data; for log processed data with Break Log Data By Decades on, it instead determines the breaks per decade (rounded up), so the total may exceed the target.
Break Log Data By DecadesBooleanPlaces the legend breaks of log processed data at rounded levels aligned to log decades (e.g. 1, 3, 10, 30) instead of evenly in log space, matching the EVS legend’s logarithmic decades.
Export Profile In XYBooleanWrites the profile in XY plan orientation: X is the distance along the transect, Y is the elevation (times the Z Scale), and Z is 0. When off, the output keeps the section profile (world-recovered) coordinates.

section profile axes

The section profile axes module places 2D axes in a section profile viewer. The horizontal (distance) axis measures the distance along the transect, starting at 0, and the vertical axis measures elevation. There is never a Y axis: only the profile-plane (XZ) grid exists, and label placement is fixed for the viewer’s locked front-on camera.

Section profile axes only works with extents provided by a section profile viewer. For axes in a standard 3D viewer, use axes instead.

The size of text and tick marks is based on a percentage of the extent of the profile. The axes can also be exported as an ArcGIS Pro layer package, optionally in XY plan orientation.

Ports

DirectionNameTypeDescription
InputInput ObjectsRenderableAny number of renderable objects used to determine extents.
InputInput Geologic FieldFieldThe field to use for determining extents.
OutputOutput ObjectRenderableThe renderable object used for connecting to the viewer.

Properties

PropertyTypeDescription
Allow RunBooleanThis toggle will prevent the module from running when turned to the Off position.
ExplodeDoubleThe Explode value is used to turn off the labelling along the elevation axis, as this would be inappropriate for exploded models.
ExecuteButtonAllows the module to run one time even if the Allow Run toggle is turned to the off position. This allows the user to make multiple changes with only one update.

Spatial Definition

PropertyTypeDescription
Distance ExtentsRange (Min/Max)The extents of the axes along the transect, starting at 0. When linked they follow the currently connected view or objects.
Elevation ExtentsRange (Min/Max)The vertical extents of the axes. When linked they follow the currently connected view or objects.
Round ExtentsBooleanIncreases the extents so the labeling starts at logical coordinates, rounded down at the minimum of distance and elevation and rounded up at the maximum.
Offset FactorDoubleA percentage to offset the extents beyond the data extents.
Display Distance LabelChoice: At Min Extent, At Max ExtentPlaces the labels for the distance axis at the min or max extent.
Display Elevation LabelChoice: At Min Extent, At Max ExtentPlaces the labels for the elevation axis at the min or max extent.
Distance Interval SpacingDoubleThe spacing between each grid line along the distance axis. When linked, the spacing is sized automatically from the profile extents.
Elevation Interval SpacingDoubleThe spacing between each grid line along the elevation axis. When linked, the spacing is sized automatically from the profile extents.
Minor To Major IntervalsIntegerThe number of minor intervals for every major interval.
Max IntervalsIntegerLimits the number of intervals created.

Display Settings

PropertyTypeDescription
Label SubsettingChoice: None, Blank LabelsEnables or disables the automatic removal of overlapping labels.
Blank FactorDoubleA scale used when determining the bounds of a label for overlap avoidance. The scale is based on the height of the label. Available when Label Subsetting is Blank Labels.
Draw BoxBooleanSpecifies whether the axes are drawn as a box around the profile or as single distance and elevation lines.
Draw TicksBooleanSpecifies whether ticks are drawn along the axes.
Box Line WidthDoubleThe thickness of the box lines.
Display GridBooleanDetermines whether grid lines are displayed across the profile plane.
Display MajorBooleanSpecifies whether the major tick marks, gridlines, and their value labels are displayed.
Display MinorBooleanSpecifies whether the minor tick marks and gridlines are displayed. On the elevation axis it also controls the intermediate value labels between the majors.
Major Gridline StyleChoice: Solid, Dashed, Dotted, Dashed-DottedThe way the major gridlines are displayed.
Minor Gridline StyleChoice: Solid, Dashed, Dotted, Dashed-DottedThe way the minor gridlines are displayed.
Gridline Pattern SpacingDoubleThe repeat length of the dash/dot pattern for the major and minor grid lines, in model units. When linked, it is set automatically from the model extents.
Major Line WidthDoubleThe width of the major grid lines.
Minor Line WidthDoubleThe width of the minor grid lines.

All Axes Settings

PropertyTypeDescription
Axes ColorColorSets the color for all axes.
Label TypeChoice: TrueType Fonts, Line FontsSelects between two font types. TrueType fonts are standard fonts. Line fonts are low impact fonts which perform better when large numbers of labels are generated.
TrueType Font StyleFontAlters the basic look of the font. Available when Label Type is TrueType Fonts.
Title Height FactorDoubleThe height of the title on each axis as a percentage of the Tick Label Height.
Center TitlesBooleanAnchors each axis title at the middle of its axis, offset outward past the tick labels and reading along the axis, instead of at the end of the axis. The Title Offset then controls how far beyond the tick labels the title is drawn.
Title OffsetDoubleA distance to offset the title from the corner of the axes box. This value affects all axes.
Tick Label HeightDoubleThe height of the tick labels on each axis as a percentage of the total axes extent.
Tick Label PrecisionIntegerDetermines how the tick label values are formatted for all axes. For values of zero and larger it sets the number of decimal points. If negative, the number of decimal points is determined automatically based on the value; changing the negative value controls the number of decimal points used in the automatic conversion.
Tick ScaleDoubleThe relative size of the tick marks and the label offsetting for all axes.
Tick Label OffsetDoubleA distance to offset the tick labels from the end of the tick marks. This value is set for all axes.
Show LabelsBooleanTurns on or off the labels for all axes.

Distance Axis Settings

PropertyTypeDescription
Display AxisBooleanTurns on or off the visibility of the axis.
Axis ColorColorSets the color for the entire axis and the labels for that axis.
Title NameStringThe title label for the axis.
Title OffsetDoubleA distance to offset the title from the corner of the axes box.
Tick Label PrecisionIntegerDetermines how the tick label values are formatted. For values of zero and larger it sets the number of decimal points. If negative, the number of decimal points is determined automatically based on the value; changing the negative value controls the number of decimal points used in the automatic conversion.
Tick Label OffsetDoubleA distance to offset the tick labels from the end of the tick marks.
Show LabelsBooleanTurns on or off the labels along the axis.

Elevation Axis Settings

PropertyTypeDescription
Display AxisBooleanTurns on or off the visibility of the axis.
Axis ColorColorSets the color for the entire axis and the labels for that axis.
Title NameStringThe title label for the axis.
Title OffsetDoubleA distance to offset the title from the corner of the axes box.
Tick Label PrecisionIntegerDetermines how the tick label values are formatted. For values of zero and larger it sets the number of decimal points. If negative, the number of decimal points is determined automatically based on the value; changing the negative value controls the number of decimal points used in the automatic conversion.
Tick Label OffsetDoubleA distance to offset the tick labels from the end of the tick marks.
Show LabelsBooleanTurns on or off the labels along the axis.

Esri Export

PropertyTypeDescription
Package FileFileThe ArcGIS Pro layer package (*.lpkx) output; setting the filename writes the package. The package bundles the axes lines and labels as feature classes in a file geodatabase, together with a layer file styled to match the axes, into one portable file.
Export Profile In XYBooleanWrites the profile in XY plan orientation: X is the distance along the transect, Y is the elevation (times the Z Scale), and Z is 0. When off, the output keeps the section profile coordinates.
Z ScaleDoubleThe vertical exaggeration applied to the exported elevations, so the axes line up with other exaggerated layers (feature layers have no display-side exaggeration in ArcGIS Pro).

texture cross section

The texture cross section module allows you to apply images along a complex non-linear cross section path and compensate for the image scale and registration points at various points along the fence path.

This functionality provides the mechanism to accurately apply hand-drawn cross sections to 3D fence diagrams, such as those created by 3d cross section. When combined in an application with edit horizons, texture cross section allows you to modify your 3D stratigraphic geology to accurately match your hand-drawn cross sections.

Control points match positions in the image (pixel space) to positions along the line, with optional top and bottom adjustments, so that distortions in a scanned or hand-drawn section can be corrected. Control point lines can be displayed on the output to show where each control point falls.

Ports

DirectionNameTypeDescription
InputInput FieldFieldThe field to texture with the selected image.
InputInput LineFieldThe main line used to project the image.
OutputOutput ObjectRenderableA renderable object displaying the textured field.

Properties

PropertyTypeDescription
Allow RunBooleanThis toggle can prevent the module from running, allowing the user to make changes to large data sets without waiting for updates.
ExecuteButtonThis button will force the module to run even if the Allow Run toggle has been turned off, allowing the user to make a number of changes before updating.
FilenameFileThe image file to project onto the cross section. Supports PNG, JPG/JPEG, BMP, GIF, TIF/TIFF, WebP, SID, ECW, PNM, SGI, RGB, and XPM images.
Allow TransparencyBooleanEnables transparency support within the image. This allows the inclusion of partially transparent images, but can interfere with other transparent objects in the scene.
Starting PercentDoubleHow far along the image to start mapping onto the input surface.
Starting Z ExtentsRange (Min/Max)The vertical range of the input field at the start of the image. These can be altered to change how the image is mapped onto the output.
Display Control Point LinesBooleanShows or hides the control point lines.
Control Point ListControl Point ListThe list of control points used to match pixels to the model. Each control point sets a percent along the line, a percent along the image (pixel space), and top and bottom adjustment percentages.
Ending PercentDoubleHow far along the image to end mapping onto the input surface.
Ending Z ExtentsRange (Min/Max)The vertical range of the input field at the end of the image. These can be altered to change how the image is mapped onto the output. When linked, they match the Starting Z Extents.

Image Processing

PropertyTypeDescription
Flip HorizontalBooleanReads the input image from right to left instead of left to right.
Flip VerticalBooleanReads the input image from bottom to top instead of top to bottom.
BrightnessIntegerAdds or removes brightness from every pixel.
ContrastIntegerAdds or removes contrast from every pixel, making bright spots brighter and dark spots darker.

section profile viewer

The section profile viewer is a restricted viewer for section profiles. Its camera is permanently oriented front-on to the XZ plane, so the horizontal axis is the distance along the section and the vertical axis is elevation. Unlike the standard viewer, the view cannot be rotated.

It is designed to display straightened content such as the output of section profile, section profile samples, and section profile axes. Section profile content is not in world coordinates, so it is displayed in this viewer rather than in a standard 3D viewer, and section profile axes only works with extents provided by a section profile viewer.

By default the Rendering Mode is set to Model Tree, which draws objects in model tree order so that entries higher in the model tree cover the ones below them. This keeps overlapping coplanar profile content (for example samples drawn on top of a profile) displayed in a predictable order. Picked locations and the Distance Tool report distance along the section and elevation instead of X, Y, Z coordinates.

Ports

DirectionNameTypeDescription
InputObjectsRenderableRenderable objects to visualize.
OutputViewViewThe view containing all associated renderable objects.

Properties

PropertyTypeDescription
Z ScaleDoubleThe scaling factor for vertical (z) coordinates. The viewer uses this for computing proper distances and probe coordinate locations.
ZoomDoubleThe magnification of the section profile view. The mouse wheel also adjusts this value.
BookmarksBookmarksBookmarked project states for reuse. Bookmarks may include view states, visibility states, sequence states, or any combination.
Zoom To FitButtonZooms to fit the entire section profile, and re-centers around the centroid of the scene.
Zoom To Fit ExactlyButtonZooms and re-centers so the section profile extents exactly fill the view, with no margin.
Show ContentsBooleanShows or hides the Viewer Contents.
Pin ContentsBooleanDetermines whether the contents panel is pinned or overlaid.

Rendering

PropertyTypeDescription
Rendering ModeChoice: 3D, Model TreeControls how overlapping objects are drawn. Model Tree draws the objects in model tree order, with entries higher in the model tree covering the ones below them. 3D uses standard depth-based rendering.
Anti AliasingBooleanSmooths jagged edges using FXAA, a fast post-process applied to the whole image. When linked, follows the application Anti Aliasing default in the user options.
Opacity ProcessingChoice: Fast, High QualityControls how overlapping transparent surfaces are composited. Fast blends them in draw order (cheapest, but transparency seen through multiple layers can look wrong). High Quality uses depth peeling to composite them in the correct order, at the cost of extra render passes. Not used in Model Tree mode, which always composites in draw order. When linked, follows the application default in the user options.
Max Opacity PassesIntegerThe maximum number of depth-peeling passes used by High Quality opacity processing. Each pass resolves one more layer of overlapping transparency; higher values handle deeper transparent stacks but cost more. Used only with High Quality. When linked, follows the application default in the user options.

Camera Settings

PropertyTypeDescription
Auto Fit SceneChoice: Never, On Any Change, On Significant ChangeControls what kind of change will cause the viewer to normalize the view.

Interaction

PropertyTypeDescription
Picked ObjectStringDisplays the current object selected in the viewer. Updated by holding Ctrl and clicking on an object in the viewer.
Picked DistanceDoubleDisplays the distance along the section of the current location selected in the viewer. Updated by holding Ctrl and clicking on an object in the viewer.
Picked ElevationDoubleDisplays the elevation of the current location selected in the viewer. Updated by holding Ctrl and clicking on an object in the viewer.
Center On PickedButtonIf an object has been picked in the viewer, forces the viewer to center around that location.
Show Viewer CenterBooleanShows an indicator of the current view center point.

Background

PropertyTypeDescription
StyleChoice: Solid Color, Two Color Gradient, VignetteControls how the background is colored.
Gradient AngleDoubleChanges the orientation of the gradient computed in the background. Available with Two Color Gradient.
Background ColorColorSets the primary background color. When linked, uses the application Background Color.
Gradient ColorColorSets the second color of the gradient. When linked, uses the application Gradient Color.

Window Size

PropertyTypeDescription
Activate WindowButtonBrings this viewer window to the foreground in the EVS user interface.
Window SizingChoice: Size Manually, Fit to WindowThe method for determining how to size the viewer contents.
Viewer WidthIntegerThe width of the rendered portion of the viewer, in pixels.
Viewer HeightIntegerThe height of the rendered portion of the viewer, in pixels.
Viewer Actual WidthIntegerThe actual width of the rendered portion of the viewer, in pixels.
Viewer Actual HeightIntegerThe actual height of the rendered portion of the viewer, in pixels.
Video Safe AreaChoice: None, HD/1080p/4K, Web and Phone Safe, NTSC, PAL, SECAMDisplays the areas that are usable for both text and animation purposes for several standard video formats when creating a video animation.

Export Image

PropertyTypeDescription
View ScaleDoubleThe scale to apply to both the viewer’s height and width when creating the image. Values are truncated to integers when setting the actual width and height.
Auto Scale Forward Facing FontBooleanWhen selected, all forward facing fonts in the image will be scaled depending upon the size of the output image.
Prefer LosslessBooleanPrefer using lossless compression when the image format supports it.
QualityIntegerAffects various lossy output files, including JPEG. Higher qualities result in less loss to the image but create larger files.
Transparent BackgroundBooleanCreates an image with a transparent background.
Image FilenameFileThe image file and format (PNG, WebP, or JPEG) to use when creating the image.

Distance Tool

PropertyTypeDescription
Measure DistanceBooleanAllows the user to probe two locations in the viewer and return detailed information about each point as well as the line connecting the two locations.
First Point DistanceDoubleThe distance along the section of the first point probed using Ctrl + Left click. This value may be altered to change the line values, but it will make the data and object probed on invalid.
First Point ElevationDoubleThe elevation of the first point probed using Ctrl + Left click. This value may be altered to change the line values, but it will make the data and object probed on invalid.
Second Point DistanceDoubleThe distance along the section of the second point probed using Ctrl + Left click. This value may be altered to change the line values, but it will make the data and object probed on invalid.
Second Point ElevationDoubleThe elevation of the second point probed using Ctrl + Left click. This value may be altered to change the line values, but it will make the data and object probed on invalid.
Clear PointsButtonClears the probed points.
Distance Line ColorColorThe color of the line between the probed locations.
Point RadiusDoubleThe radius of the spheres displayed at the probe locations.
Line FilenameFileThe EVS Line File (*.elf) to write the distance line to.
File BehaviourChoice: Append To File, Overwrite FileWhen an EVS Line File has been selected, chooses whether to overwrite it with the stored points or append the points to the existing line file.